JTEC 963+ tracked jaw crusher

HAND-BUILT IN THE UK

JTEC 963+

Tracked jaw crusher · Dual Power

200 tonnes an hour.*
On 8–9 litres of diesel.*

Compact, easy to move at 26 tonnes, and cheap to run. Ask us and we'll show you.

*Maximum figures. Output and fuel use vary with material, feed size, jaw setting and site conditions.

Dual Power as standard

Run it on diesel –
8–9 litres an hour.*

Or plug it in –
no diesel at all.

The JTEC 963+ runs on its John Deere engine anywhere, or 100% electric from a 3-phase mains supply on site.*JTEC 963+ maximum figure – varies with material and site conditions.
2014

Built to last. This JTEC 963 was supplied new in 2014. We took it back in part-exchange in 2023, our partner Hunext refurbished it – and it’s now back at work in Hungary.
JTEC 963 from 2014 on a low-loader after years of work, traded back in 2023
2023 Traded back after nine years’ work

The same JTEC 963 refurbished by Hunext, working in Hungary
Today Refurbished by Hunext, working in Hungary

Big output from a compact crusher.

Hand-built in the UK, the JTEC 963+ crushes up to 200 tonnes an hour through its 900 × 630 mm jaw on just 8–9 litres of diesel.

At 26 tonnes it’s compact and easy to move, and with Dual Power you can switch from the diesel engine to your own mains supply and cut running costs even further.

Fuel savings

How much are you burning?

Put in your numbers. We’ll show you what the same hours cost on a JTEC 963+ – and how much you could save.

Currency

YOUR CRUSHER a year

litres of diesel

JTEC 963+ a year

litres of diesel at about 9 L/hr

YOU COULD SAVEa year – litres less, every working hour

Estimate based on the JTEC 963+ at about 9 L/hr. Real fuel use varies with material, feed size, jaw setting and site conditions.

See it working

The 963+ on the job

More videos of JTEC machines →

Technical specification

JTEC 963+ specs

Crusher

Jaw size
900 × 630 mm (36" × 25")
Max output
up to 200 tph
Jaw setting (CSS)
40–120 mm (1½"–4¾")
Crusher speed
280–300 rpm
Drive
Hydraulic, reverse crush
Adjustment
Manual hydraulic
Jaw plates
Reversible

Power & fuel

Engine
4-cylinder diesel
Dual Power
Run on mains electric
Fuel use
8–9 L/hr (2.1–2.4 US gal)
Controls
Radio remote, Auto Run

Feed hopper

Feeder
Vibratory, variable speed
Feeder length
2.9 m (9.6 ft)
Hopper capacity
3 m³ (106 ft³)

Main conveyor

Width
800 mm (2.62 ft)
Discharge height
2.8 m (9.17 ft)
Belt speed
1.6 m/sec
Access
Hydraulic lowering
Also fitted
Overband magnet, side belt

Dimensions & weight

Transport L × W × H
11.42 × 2.50 × 3.27 m
37' 6" × 8' 2" × 10' 9"
Working width
3.80 m (12' 6") with side belt
Weight
26,000 kg (57,300 lb)

Want it all on one page? Download the spec sheet, or ask us to build it to your spec.

Download spec sheet (PDF)

Maximum figures shown. Output and fuel use vary with material type and hardness, feed size, jaw setting and site conditions. Specifications may change without notice.

Ring us now.
You’ll get a person, not a menu.